Plate and frame filter press

Plate and Frame Filter Press

I. Product Overview
Plate and frame filter press is an important solid-liquid separation equipment in mining production, especially suitable for processing viscous and fine materials. This equipment realizes high efficiency separation through pressure filtration, and is used as the end mechanical treatment equipment in the waste water treatment of sand and gravel system, which is characterized by good treatment effect and strong adaptability.

Composition of equipment structure
1. Main structure

• Thrust plate assembly

• Compression plate assembly

• Filter plate compression plate

• Support frame body

2. Drive system

• Active sprocket

• Passive sprocket

• Hydraulic station

• Cylinder block assembly

3. control system

• Electric control box

• Plate puller

• Hydraulic system

Third, the technical characteristics
1. Performance parameters

2. Product Advantages

• Adapt to all kinds of viscous and fine materials

• Simple structure and easy operation

• Flexible selection of filtering area

• Small footprint and stable operation

3. Limitation of use

• Relatively small processing capacity

• Higher consumption of filter cloth

• Manual cleaning and maintenance

• Continuous operation difficulties

Workflow

• Pressing stage: hydraulic cylinder pushes the moving plate to press the filter plate group.

• Feed filtration: pump the material into the filter chamber for solid-liquid separation.

• Unloading and loosening: the hydraulic system unloads the pressure and pulls away the device to separate the filter plate.

• Unloading and cleaning: the filter cake falls off automatically and the filter cloth is cleaned up manually.

V. Maintenance
1. Daily inspection

• Condition of sealing surface of filter plate

• Hydraulic system oil level pressure

• The degree of integrity of the filter cloth

2. Regular maintenance

• Monthly cleaning of filter cloth

• Quarterly hydraulic oil change

• Check the flatness of the filter plate every year

3. Caution

• Avoid pressurizing the empty chamber

• Control feed pressure

• Clean up the residue in time

Note: The actual selection needs to be based on the material characteristics, processing capacity and other parameters to determine, can consult our professional and technical personnel.